Skip to content Skip to sidebar Skip to footer

How To Remove Rusted Nuts From Exhaust


How To Remove Rusted Nuts From Exhaust. I use a portable turbo torch many times using mapp gas (gets pretty darn hot) when an acetylene rig might be too much/ expensive or unavailable. Putting cuts on the bolt and nuts will also be a surefire way of removing immovable bolts.

Removing a rusty nut from an exhaust pipe. YouTube
Removing a rusty nut from an exhaust pipe. YouTube from www.youtube.com

The nut is removed cleanly and easily, with no damage to the surrounding area… wrap a fibreglass cloth around the exhaust and hold it in place. You can always try to good ol' torch too heat em up, that usually does the trick. Squinting does not work as well as you think.

For More Tips About How You Can Remove Rusted Bolts When Working On Your Vehicle.


Good sharp chisel can make fast work of it, knowing how t. Wipe rust dust and debris from the rusted area, apply a dab of chrome polish to this area, then apply the steel wool, more lightly this time. Sometimes you have to go in with a die grinder or dremel tool.

Point The Heat On Each Bolt And Wait For About Five Minutes.


Pic 2) these work really good on nuts or bolts. That's nothing compared having the doctor pull steel fragments out of your eyes. Squinting does not work as well as you think.

Be Sure To First Clean Off.


It works awesome on rusty bolts, if they still have it. Use a heat gun and a pry bar to remove the manifold. We used to use the heat riser penetrant at the chevy dealer.

If Rust Still Exists, Apply More Chrome Polish Until Rust Is Gone.


Putting cuts on the bolt and nuts will also be a surefire way of removing immovable bolts. The nuts are basically at the bottom of a small diameter (4) deep (18) hole. The nut is removed cleanly and easily, with no damage to the surrounding area… wrap a fibreglass cloth around the exhaust and hold it in place.

Splitting The Bolt Into Pieces Removes Some Of The Tension That’s Built Up Due To It Being Rusted In Place, Which Should Allow You To Rotate And Remove It With Ease.


Split the nuts off the threads. One of the simplest ways you can do this is with a special, long lighter, which can be picked up at your local hardware store, or maybe even. In my example, i tried several methods, with only 1 proving ove.


Post a Comment for "How To Remove Rusted Nuts From Exhaust"